TPlink PPPOE settings

If you have reset your TPlink Wifi Router supplied by Ineedbroadband.

Pre checks: Make sure black power unit of your antenna has the cable plugged into the LAN socket, and the other end of this cable is connected to the WAN port of the router (blue socket)

Step1: Connect your pc to the router via a LAN ethernet cable (yellow socket)

Step2: Open your web browser and enter http://192.168.0.1 in your web browser address bar at the top of the page,(NOT the search bar), you should be redirected to the TPlink screen, If not then please check your cable.

Step3: Login With Username: admin and Password: admin

Step4: Click Network and WAN

Step5: Click PPPOE and enter your username and password issued on your welcome email, this will be your email that you registered with us and the last 6 digits of your telephone number. Leave all other settings as default and click save and reboot your router as instructed and wait 1 min.

Step6: Search your wifi signals for the TPlink signal ( TPlink-xxxx

Step7: Enter the wireless pin when requested by your wifi device.

  • 2 Users Found This Useful
Was this answer helpful?

Related Articles

TPlink Wireless channel

To access your router type http://192.168.0.1 in your web browser address bar. You will then see...

TPLink Router has been reset and how to reset

If you need to reset your TPlink Wifi Router supplied by Ineedbroadband. Press and hold the reset...

TPlink Firmware Update

Please follow the link below and select Wireless product Model number to match your router....

TPLink Change to 802.11bg Mixed

Please follow the steps below. To access your router type http://192.168.0.1 in your web browser...

Tenda router has been reset

If you have reset your Tenda Wifi Router supplied by Ineedbroadband. Pre checks: Make sure you...