If you have reset your TPlink Wifi Router supplied by Ineedbroadband.
Pre checks: Make sure black power unit of your antenna has the cable plugged into the LAN socket, and the other end of this cable is connected to the WAN port of the router (blue socket)
Step1: Connect your pc to the router via a LAN ethernet cable (yellow socket)
Step2: Open your web browser and enter http://192.168.0.1 in your web browser address bar at the top of the page,(NOT the search bar), you should be redirected to the TPlink screen, If not then please check your cable.
Step3: Login With Username: admin and Password: admin
Step4: Click Network and WAN
Step5: Click PPPOE and enter your username and password issued on your welcome email, this will be your email that you registered with us and the last 6 digits of your telephone number. Leave all other settings as default and click save and reboot your router as instructed and wait 1 min.
Step6: Search your wifi signals for the TPlink signal ( TPlink-xxxx
Step7: Enter the wireless pin when requested by your wifi device.
